Operating A Dvd Player Or Other Device - HP 1080p User Manual

Operating a DVD Player
or Other Device
After programming a home entertainment device into
your remote control, press the Device button on the top
of your remote control as needed to select the device to
control. Refer to "Selecting a Device to Control" on
page 35.
The tables that follow list the buttons available to
operate the selected, programmed device. Your device
may not operate in response to all of these buttons.
Remote control AUD buttons
AUD
button Description
Power Press the Device
button, if needed, to
select the device.
Point the remote
control at the device,
and then press Power
to turn the selected
device on or off.
Vol Press a Volume button
to raise (or lower) the
sound.
Mute Press Mute to turn
sound off or on.
40
HP MediaSmart HDTV User Guide
Remote control STB device buttons
STB
button
Power
Media
Icon
Last
Source
Up/
down/
left/right
arrows
Recorded
TV
OK
Description
Press the Device
button, if needed, to
select the device.
Point the remote
control at the device,
and then press Power
to turn the selected
device on or off.
Satellite or
■
cable box: The
Media button is
not valid.
PVR: Press Media
■
to go to the
top page.
Press Last Source to
change the input
source to the last
viewed source.
Press an Arrow button
to move the cursor.
Press Recorded TV to
open a list of
recorded television
programs for the
device that is
controlled by the
remote control, if the
device supports the
button.
Press OK to select the
current option.
Icon
Media
OK