Removing The Lcd Bezel - eMachines HM50-YK Service Manual

Removing the LCD Bezel

1. See "Removing the LCD Module" on page 61.
2. Remove the two upper and two lower bezel screw caps and screws.
Step
LCD Bezel
3. Starting from the bottom edge of the bezel, pry the bezel upwards and away from the panel. Work along the
right side toward the top of the bezel, prying the covers apart. Continue along the top edge and down the left
side to remove the bezel.
NOTE: If necessary, use a pry to lift up the outside edges of the bezel.
84
Size
M2.5*6
Quantity
4
Screw Type
Chapter 3