Bang & Olufsen BeoVision?8-40? Manual page 28

Hide thumbs Also See for BeoVision?8-40?:
Table of Contents

Advertisement

DTV Play Timer
You can program a Play Timer on a
connected Bang & Olufsen audio or
video product. If the Play Timer uses the
DVB Module in the television as source,
you must tell it which MODE it should
start in. That is should radio or television
switch on. Also you must tell it which
GROUP, that is which of the station or
channel groups should be used when
the Play Timer is executed.
To make settings for a DTV Play Timer ...
> Bring up the TV SETUP menu and highlight 
OPTIONS. 
> Press the centre button to bring up the 
OPTIONS menu and highlight DTV PLAY 
TIMER.
> Press the centre button to bring up the 
DTV PLAY TIMER menu, and use the 
navigation button up or down to move 
between MODE and GROUP.
> Use the navigation button left or right to 
select the setting you want. 
> Press the centre button to store the 
setting.
> Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
Note! If the TV tuner is disabled, and the
DVB module is activated by pressing TV on
the remote control, the name of the menu is
TV PLAY TIMER.
Also remember to set the PLAY TIMER menu
to ON, if the television or its speakers are to
be activated by the Play Timer.
>> Set the television to switch itself on or off
Auto standby
The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
This function only applies in video mode
not in audio mode.
To activate the auto standby ...
> Bring up the TV SETUP menu and highlight 
OPTIONS. 
> Press the centre button to bring up the 
OPTIONS menu and highlight AUTO 
STANDBY.
> Press the centre button to bring up the 
AUTO STANDBY menu. 
> Use the navigation button up or down to 
select the setting you want. 
> Press the centre button to store the 
setting.
> Press BACK to back up through previous 
menus or press and hold BACK to exit all 
menus. 
When you have activated the function, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby, if you do not operate it.
28
DTV PLAY TIMER
MODE
GROUP
DTV PLAY TIMER menu
AUTO STANDBY
AFTER 1 HOUR
AFTER 2 HOURS
AFTER 4 HOURS
OFF
AUTO STANDBY menu
TV
SPORT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Beovision 8-40

Table of Contents