Quick Reference - Blaupunkt Munich CM 168 Operating Instructions Manual

Quick reference

1 REL
To release the detachable panel (theft
protection).
Press this knob and remove the re-
lease panel.
2 ON - Power up/down
Press this button to turn the unit on. It
will play at the volume set under DSC.
Mute: If you press this button briefly
during radio reception, the volume will
turn down instantly.
This function is cancelled by pressing
the ON button again. You can pro-
gramme the mute volume (refer to
"DSC programming").
Press the button for about 1 second to
turn the unit off.
Switching on/off via the ignition:
If the unit has been connected corre-
spondingly, it can also be turned on
and off with the vehicle ignition.
If ON is pressed while no power is be-
ing supplied to the red (ignition) lead,
the unit will automatically turn off after
one hour. This prevents the battery
from going dead.
3 Volume knob
Turn the knob to adjust the volume.
4 DSC Direct Software Control
This feature allows you to adjust the
basic programmable settings.
For further information, refer to the
section on DSC programming.
5 Cassette slot
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in direction
"TAPE 1".
6 Display
The display indicates all settings, op-
erating modes and functions.
7
This button switches tape playback
between Tape 1 and Tape 2 (different
sides of the tape).
8 8
8 8 8
Eject
Press this button to eject the
cassette.
9 Rocker switch
Radio mode
/ Seek tuning
Up
Down
<< / >> Manual tuning
>> up in short intervals
<< down in short intervals
Cassette mode
/ CPS function
Up
Down
Press repeatedly to skip over the cor-
responding number of songs. Press
or << >> to stop the function.
<< Fast forward
>> Fast rewind
5