Deleting All Cd Names; Clock/Display Changes; Setting The Clock - Blaupunkt Munich CM 168 Operating Instructions Manual

Deleting all CD names

All of the CD names stored in the CD chang-
er will be deleted.
Select DSC programming mode.
• Press DSC.
• Press / to select CDC_NAME.
• Press << >> to enter the CD select
mode.
• Press DSC and hold it down. After 2
seconds and after 8 seconds you will
hear a beep respectively
"ONE_NAME" and then "ALLNAMES"
will appear in the display.
• Release DSC. "DELETED" will appear
in the display. The names of all of the
CDs have now been deleted. The
main CDC_NAME menu will appear
again in the display.
18

Clock/Display changes

This unit is equipped with an internal clock.
Display priority:
To alter the display priority, press
you hear a beep. Repeat this procedure
until the desired display appears.
Temporary display change:
Press as many times as needed to show
the desired information for a few seconds.
Radio mode
Press to switch between the clock, the
station name and the frequency.
Cassette mode
Press to switch between the track played
and the clock.
Changer mode
Press to switch between a display of the
CD Name,CD number, the playing time
elapsed and the clock.

Setting the clock

Set the clock in the DSC mode.
until
• Press DSC briefly.
• Press / to select the function
"CLOCKSET".
• Press << >> to activate the hours or
the minutes. The option you can set
will flash.
• Press / to alter the flashing dis-
play.
• When you have completed the setting,
press DSC briefly to store it.
• Press DSC again to exit DSC mode.