Quantum 3U Quick Start Manual page 9

Figure 10 Closing the Top
Access Panel
Installing a Second Tape Drive or Replacing a Tape Drive
Closing the Top Panel
To close the top panel (see
1 Close the top access panel.
2 Install the 3U enclosure back into the rack.
3 Connect the AC power connector on the back panel of the 3U Rackmount enclosure.
4 Press the drive power switch on the front panel of the 3U Rackmount enclosure to
turn on the drive power.
LTO-5 Full-Height Tape Drive
Figure 10):
Top panel
9