Configuring [Smart Transfer] - Panasonic lumix DMC-SZ8 Owner's Manual

Configuring [Smart Transfer]

When using Smart Transfer for the first time, follow the steps below to set it up.
From the next time on, you can change the settings from [Set Destination] (P113).
1
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].
2
Press 3/4 to select [Smart Transfer], and press [MENU/SET].
3
Select the method for connecting to a wireless access point, and set.
• P115
Refer to
4
Set the transfer destination.
•
For details about the preparations before the transfer, refer to "When sending images to PC" on
P107.
1 Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
2 Press 3/4 to select the folder you want to send, and then press [MENU/SET].
5
Press 3/4 to select [Auto Transfer], and press [MENU/SET].
6
Press 3/4 to select [ON], and press [MENU/SET].
•
Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.
for details.
Wi-Fi
- 111 -
(P37)