Panasonic lumix DMC-SZ8 Owner's Manual page 100

Changing the connection method
∫
To change the connection method, press
2, and then select the connection method.
When connecting with [Via Network]:
(On the camera)
1
Press 3/4 to select [Via Network], and then press [MENU/SET].
•
Follow the connection procedure described on
access point.
(On your smartphone/tablet)
2
Turn on the Wi-Fi function.
3
Connect the smartphone/tablet to the wireless access point to which the camera is
connected.
4
Start "Image App".
When connecting with [WPS Connection]
(On the camera)
1
Press 3/4 to select [Direct], and then press [MENU/SET].
•
Follow the connection procedure described on
smartphone/tablet.
(On your smartphone/tablet)
2
Start "Image App".
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device and
make security-related settings. To check whether your smartphone/tablet supports the function,
refer to the operating instructions of the smartphone/tablet.
Terminating the connection
∫
After use, terminate the connection to the smartphone/tablet. Once turning off the
connection, you can perform normal recording and playback.
1
Press [ ].
2
On the smartphone/tablet, close "Image App".
If you are using an iOS device
On the screen of "Image App", press the home button to close the app.
If you are using an Android device
On the screen of "Image App", press the return button twice to close the app.
(P96)
¢
(P96)
- 100 -
Wi-Fi
Please set on your smartphone
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
SSID:
Password:
Change method Cancel
(P115) to connect the camera to a wireless
in [Direct]:
(P118) to connect the camera to the
Select connection method
Connect to the
Via Network
network (AP)
Direct
Cancel Select Set