Panasonic lumix DMC-SZ8 Owner's Manual page 116

If you are not sure about the WPS compatibility (connecting by [From List])
Search for available wireless access points.
•
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
•
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless
access point you are using.
1
Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
•
Pressing 2 will search for a wireless access point again.
•
Wireless access points with non-alphanumeric characters may not be
displayed correctly.
•
If no wireless access point is found, refer to
[Manual Input]
2
(If network authentication is encrypted)
Enter the encryption key.
•
For details on how to enter characters, refer to
on P117.
When connecting with [Manual Input]
∫
1
On the screen displayed in step
compatibility (connecting by [From List])", select [Manual Input] by pressing 3/4,
then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
•
For details on how to enter characters, refer to
3
Press 3/4 to select the network authentication type, and press [MENU/SET].
•
For information on network authentication, see the manual of the wireless access point.
4
Press 3/4 to select the encryption type, and press [MENU/SET].
•
The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK]/[WPA-PSK]
[Common Key]
[Open]
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
•
Check the wireless access points instruction manual and settings when saving a wireless access
point.
•
If no connection can be established, the wireless access point's radio waves may be too weak.
"
Refer to Message Display
•
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
"
on P116.
" "
(P137) and
Wi-Fi
"
When connecting with
"
Entering Text
1
of "If you are not sure about the WPS
"
Entering Text
Encryption types that can be set
[TKIP]/[AES]
[WEP]
[No Encryption]/[WEP]
"
Troubleshooting (P140)
- 116 -
Select the destination (AP)
0123456ABCD
0123456ABCD-1
Manual Input
Cancel
ABC
"
section
GHI JKL
PQRS TUV
Cancel
"
section on P117.
for details.
Update
Select Set
A 1
DEF
a &
A A
MNO
a a
WXYZ Delete Delete
Set
Set
Select Input