HP PhotoSmart 812 User Manual page 56

Problem
The camera
does not
respond
when I press
a button.
The camera
does not take
a picture
when I press
the Shutter
button.
56
Possible cause Solution
The camera is
off.
The camera is
connected to
a computer.
The batteries
are drained.
The button
may be
inactive for
the current
setting.
The camera
could be
"hung".
The camera is
not in desired
capture
mode.
The camera is
in the camera
dock.
You did not
press the
Shutter button
hard enough.
hp photosmart 812 user's manual
Turn on the camera.
The camera buttons do not
respond when the camera is
connected to a computer.
Replace the batteries.
Check the manual for proper
button operation.
Remove the batteries and let
the camera sit for 48 hours.
Reinstall the batteries and try
again.
Check the Capture Mode
selector.
Remove the camera from the
camera dock.
Press the Shutter button all the
way down until you hear a
click and see your image on
the camera Display.