Changing The Tv Configuration Setting; Changing The Language; Exiting Setup - HP PhotoSmart 812 User Manual

Changing the TV configuration
setting
This selection sets the format of the
video signal for displaying camera
images on a television with an
optional cable or HP camera dock.
1
Select TV Configuration in the
Setup menu. The TV
Configuration screen appears.
2
Using the Up/Down arrows, make one of the following two
choices and then press OK.
•
NTSC — used primarily in North America and Japan
•
PAL — used primarily in Europe
For more information on connecting the camera to a TV, refer
to Chapter 5.

Changing the language

This selection sets the language of
the menus and text on the camera
Display.
1
Select Language in the Setup
menu. The Language screen
appears.
2
Using the Up/Down arrows,
select a language and then press OK.

Exiting setup

Selecting EXIT SETUP takes you back to the Main menu.
6-Adjusting camera settings 53