Reinstall Wheels - StopTech ST-40 Caliper Installation Instructions Manual

S S S S S tep 9 tep 9 tep 9 tep 9
tep 9
R R R R R einstall einstall einstall einstall Wheels Wheels Wheels Wheels
einstall Wheels
It is very important to check the wheel-to-caliper clearance before installing wheels!
N N N N N ote: S ote: S ote: S ote: Some wheels ar ome wheels ar ome wheels are balanced on the inside, with adhesiv ome wheels ar
ote: S ome wheels ar
w w w w w eight is on the outboar eight is on the outboar eight is on the outboar eight is on the outboard edge, behind the spokes, it may inter eight is on the outboar
sary y y y y , note the w sar sar sar sar , note the w , note the weight and location of the lead, and place a new piece of the same w , note the w , note the w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same w eight and location of the lead, and place a new piece of the same weight fur
inboar inboar d or outboar d or outboar d, to clear the caliper d, to clear the caliper
inboar inboard or outboar inboar d or outboar d or outboard, to clear the caliper d, to clear the caliper d, to clear the caliper. If y
positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized. positions on all four wheels, and also on the spare, if it is full-sized.
Reinstall the wheels, and torque the lug nuts to your wheel manufacturer's specifications. It may be
necessary to snug the bolts before lowering the vehicle, and to then torque the wheels when the car is
on the ground. Alternatively, an assistant may depress the brake pedal while you tighten the wheel
nuts to the proper torque setting.
Carefully test-drive the vehicle in a safe area, at low speed, to ensure that all components are working
correctly. Then follow the pad and rotor bed-in procedure on the following pages.
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
e balanced on the inside, with adhesive-backed lead w e balanced on the inside, with adhesiv e balanced on the inside, with adhesiv
e balanced on the inside, with adhesiv
d edge, behind the spokes, it may interfer d edge, behind the spokes, it may inter d edge, behind the spokes, it may inter d edge, behind the spokes, it may inter
. If y . If y
. If you r . If y
www.stoptech.com
e-backed lead weights. If the e-backed lead w e-backed lead w
e-backed lead w
fer fer fer fere with the caliper
ou r ou r otate the tir otate the tir es r es r egularly egularly
ou rotate the tir ou r otate the tir otate the tires r es r es regularly egularly, check the lead w egularly
eights. If the eights. If the eights. If the
eights. If the
e with the caliper e with the caliper e with the caliper e with the caliper. If neces- . If neces- . If neces- . If neces- . If neces-
eight further eight fur eight fur eight fur
, check the lead w , check the lead w
, check the lead weight , check the lead w
22
ther ther ther ther
eight eight
eight eight