Install Caliper Bracket - StopTech ST-40 Caliper Installation Instructions Manual

S S S S S tep 4 tep 4 tep 4
tep 4 tep 4

Install Caliper Bracket

Install Caliper Bracket
Install Caliper Bracket Install Caliper Bracket Install Caliper Bracket
Remove the Jet nuts and washers from the caliper
mounting bracket, and put them aside for later
use.
Place a few drops of the supplied Loctite 262 on
the threads of each stock caliper bolt.
Tighten the caliper bracket bolts, using a 21mm
wrench or socket, then torque the bolts to 125
lb-ft lb-ft lb-ft.
lb-ft lb-ft
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
Install the caliper bracket, using the stock cali-
per mounting bolts, with the bracket mounted
on the outboard side of the mounting lugs, and
the bolts inserted from the inboard side.
125 125 125 125
www.stoptech.com 10