SOYO SY-5EHM Super 7 User's Manual & Technical Reference page 47

BIOS Setup Utility
System Boot Control Settings (continued)
System Boot
Control Settings
Gate A20 Option
Memory Parity
Check/ ECC
Check
3-2.4 Typematic Settings
Typematic
Settings
Typematic
Rate Setting
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
(Chars/Sec)
Typematic Delay
(Msec)
Setting
Normal
Fast
Enabled
Disabled
Setting
Disabled
Enabled
6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
250 (msec)
500 (msec)
750 (msec)
1000 (msec)
44
Description
Allows RAM access
above 1MB using the fast
gate A20 line.
This allows to perform a
redundancy check on the
parity bit in the data
strings. This method is
used for error detection
when the parity is not
found.
Description
Enables to adjust the
keystroke repeat rate.
Choose the rate at which
a character is repeated
when holding down a
key.
Choose how long after
you press a key down the
character begins
repeating.
SY-5EHM/5EH5
Note
Default
Default
Note
Default
Default
Default