SOYO SY-5EHM Super 7 User's Manual & Technical Reference page 32

Hardware Setup SY-5EHM/5EH5
Step 11. Others Connector
1. Wake-On-LAN (WOL)
Attach the 3-pin connector from the LAN card which supports the
Wake-On-LAN (WOL) function to the JP44 connector on the
mainboard. This WOL function lets users wake up the connected
computer through the LAN card.
Please install according to the following pin assignment:
Wake-On-LAN
JP44 Pin Assignment
GND
5VSB MP_Wakeup
1 2 3
2. Infrared (IR)
Plug the 5-pin infrared device cable to the IR connector. This will
enable the infrared transfer function. This mainboard meets both the
ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
Serial Infrared (SIR) Connector
SIR Pin Assignment
VCC IRRX GND IRTX
1 3 2 4 5
29