Inserting The Battery; Inserting An Sd/Sdhc Memory Card; Charging The Battery - HP PB360T User Manual

Inserting an SD/SDHC Memory Card

1. Open the battery compartment
at the bottom of the camera.
2. Insert the SD/SDHC card into the memory
card slot with the metallic part facing the
front side of the camera.
3. Push the SD/SDHC card into the memory
slot until it clicks into place.
4. Close the battery compartment.
To remove the SD/SDHC card
1. Open the battery compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.

Charging the Battery

The battery that comes along with your
package is not charged. You need to charge
the battery before using the camera.
1. Insert the battery into the battery
charger as shown.
2. Connect the power cord to the battery
charger.
3. Plug the power cord to the main outlet.
The battery charging time is 2 hours.
4