Getting Started; Attaching The Camera Strap; Inserting The Battery - HP s500 User Manual

Getting Started

Attaching the Camera Strap

To reduce the risk of dropping the camera, it is strongly recommended to attach and use the provided camera strap.

Inserting the Battery

Follow these instructions to insert the battery into the battery/memory card compartment.
Please read "Battery Information" on page 2 before inserting/removing battery.
1. If the battery is already installed, make sure to power off the
camera before removing and inserting a new battery.
2. Open the battery/memory card compartment at the bottom of
the camera by sliding the locking button towards the center as
illustrated.
3. Insert the battery into the compartment with correct orientation
as illustrated. Be sure to push the battery into position until the
battery is locked into place.
4. Close and secure the battery/memory card compartment by sliding the locking button towards the edge of the
camera (as illustrated).
7