Getting Started; Navigation Control; Attaching The Wrist Strap - HP PB360T User Manual

Getting Started

Attaching the Wrist Strap

1. Insert the short loop of the strap in the strap
eyelet.
2. Thread the larger loop of the strap though the
short loop and pull tight to attach the strap to
the camera.
Inserting the Battery
Please read "Battery Information" on page v
1. If the battery is already installed, make sure to power off the camera before removing.
2. Open the battery compartment at the bottom of the camera.
3. Insert the battery into the compartment
with the terminal facing inside the
camera and the battery indent next to the
compartment door.
4. Close the battery compartment.
before inserting/removing batteries.
3
D IS P