Initial Settings; Modes Selector Switch - HP CC450 User Manual

Hewlett-packard digital camera user manual
Hide thumbs Also See for CC450:
Table of Contents

Advertisement

Initial Settings

When the camera is powered up for the first time, please set the display language and date & time.
Setting the Language
1.
Press directional buttons to move through the selection.
2.
Highlight the desired a language, and then press
Setting the Date & Time
1.
Press left and right direction buttons to move through the selection.
2.
Press the up and down buttons to change the value for the date and time.
3.
Press
OK button
4.
If necessary, press
Menu button
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
If the camera is without battery power for more than 48 hours, the initial settings
may reset and require another setup.

Modes Selector Switch

This camera has a three mode selector switch. The different modes are:
Photo Mode
Slide the mode switch to [
(see pages 12 for additional details).
Video Mode
Slide the mode switch to [
Playback Mode
Slide the mode switch to [
The recording of voice memo attached to images is also available in this mode.
OK button
when finished. This will save your date and time settings.
to close the menu.
] take photos and record audio clips by selecting Voice REC from scene modes
] record videos (see page 29 for additional details).
] view and edit captured images or playback videos and audio clips.
13
.

Advertisement

Table of Contents
loading

Table of Contents