Inserting An Sd/Sdhc/Sdxc Memory Card; Turning The Power On And Off; Initial Settings - HP d3000 User Manual

4. Close and lock
the
battery/memory
card
compartment.

Inserting an SD/SDHC/SDXC Memory Card

Expand your camera's storage by using SD, SDHC or SDXC
memory cards.
1. Unlock and open the Battery/memory card compartment
at the bottom of the camera.
2. Insert the SD/SDHC/SDXC card into the memory card
slot with the metallic part facing the back side of the
camera.
3. Push the SD/SDHC/SDXC card into the memory slot until
it clicks into place.
4. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC/SDXC card
1. Unlock and open the battery/memory card
compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
Windows XP are not support SDXC card (exFAT format). But in Windows XP
(Service Pack 2 or 3), you can download exFAT patch update to support SDXC card.

Turning the Power On and Off

There are two ways to turn on the camera:
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends
and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 15 to know more about Record and Playback mode.
Please remove the lens cover before doing Power on.

Initial Settings

When you turn on your camera for the first time, you will be asked to do the initial settings of your camera.
First is the setup of language menu. Specify in which language menus and messages are to be displayed
on the LCD monitor.
Setting the Language
1. Press , ,
2. Select a language, and then press OK to apply.
Setting the Date & Time
1. Press or
or to move through the selection.
to move through the selection.
13