Table of Contents
Advertisement
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First
is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD
monitor.
Setting the Language
1.
Press directional buttons to move through the selection.
2.
Select a language, and then press
Setting the Date & Time
1.
Press left and right direction buttons to move through the selection.
2.
Press the up and down buttons to change the value for the date and time.
3.
Press
OK button
4.
If necessary, press
Menu button
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
•
Holding down
•
If the camera is without battery power for more than 48 hours, the initial settings
may reset and require another setup.
Modes Selector Switch
This camera has a three mode selector switch. The different modes are:
Photo Mode
•
Slide the mode switch to [
(see pages 12 for additional details).
Video Mode
•
Slide the mode switch to [
Playback Mode
•
Slide the mode switch to [
The recording of voice memo attached to images is also available in this mode.
OK button
when finished. This will save your date and time settings.
to close the menu.
or
keys to change the values continuously.
] take photos and record audio clips by selecting Voice REC from scene modes
] record videos (see page 29 for additional details).
] view and edit captured images or playback videos and audio clips.
.
13
Advertisement
Table of Contents
