Cr/Lf Mapping - Konica Minolta bizhub C353 User Manual

Settings on the control panel
4
Press the [C] (clear) key to erase the value, and then use the keypad to type in the number of lines. (5
lines to 128 lines)
– If a value outside of the allowable range is specified, the message "Input Error" appears. Type in a
value within the allowable range.
5
Touch [OK].
The number of lines per page is set.
12.2.20

CR/LF Mapping

You can specify the CR/LF substitution method when printing text data. (Default setting: OFF)
[Mode 1]: Substitutes CR with CR-LF.
[Mode 2]: Substitutes LF with CR-LF.
[Mode 3]: Substitutes with CR-LF.
[OFF]: Does not perform substitution.
!
Detail
For details on displaying the User Settings screen, refer to
page 12-2.
1
In the User Settings screen, touch [5 Printer Settings].
2
Touch [3 PCL Settings].
3
Touch [5 CR/LF Mapping].
C353/C253/C203
"Displaying the User Settings screen" on
12
12-23