Replacing Batteries; Using An Ac Power Adapter - HP 715 User Manual

Replacing batteries

The camera uses four AA batteries. You can use photo-quality
titanium, lithium, or alkaline AA batteries, or rechargeable NiMH
AA batteries. You can purchase additional batteries from your
local camera or electronics store.
Use only batteries that are in good condition. Batteries that show
signs of leakage, corrosion or swelling should not be installed in
the camera.
Note
To insert new batteries
Make sure that the camera is off and see "Step 2: Install the
batteries" on page 4 for specific instructions.
CAUTION Replace all the batteries at the same time. Do not
replace the batteries individually or use batteries of
different types. Always follow the instructions on the
battery package when handling or disposing of
batteries.

Using an AC power adapter

To extend the life of your batteries, use an AC power adapter as
your power source when connecting your camera to a computer or
when using the image display for an extended period.
CAUTION
Use only an AC power adapter that HP has approved
for use with the camera. Use of any other adapter will
void your warranty and can damage your camera.
Maintaining your camera
If you choose to use rechargeable batteries, you
must recharge them in a separate device, outside
the camera. The batteries do not recharge in the
camera when you connect an AC adapter.
43