AEG HK683320FG User Manual page 9

the hob again, the cooking zone must
be cool.
• You use incorrect cookware. The sym-
bol ? comes on and the cooking zone
deactivates automatically after 2 mi-
nutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time, the appliance deactivates. See
the table.
• The relation between heat setting and
times of the Automatic Switch Off
function:
– 1 — 3 — 6 hours
– 4 — 7 — 5 hours
– 8 — 9 — 4 hours
– 10 — 14 — 1.5 hours
4.3 Language selection
To change the language, start the appli-
ance with and than touch OK. Set the
language menu with arrows. Touch OK
to confirm. The display shows the list of
languages. Touch
language. Touch OK to confirm.
4.4 The heat setting
Touch the control bar at the heat set-
ting. Move your finger along the control
bar to change the setting. Do not re-
lease before you have a correct heat set-
ting.
4.5 Bridge function
The Bridge function connects two left
side cooking zones and they operate as
one.
First set the heat setting for one of the
left cooking zones.
or to set the
P P
14 14
8 8
5 5
3 3
0 0
To start the Bridge function touch
To set or change the heat setting touch
one of the left control sensors.
To stop the Bridge function touch
The cooking zones operate independ-
ently.
4.6 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automat-
ic Heat Up function. This function sets
the highest heat setting for some time
(see the diagram), and then decreases to
the necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch ( comes on in the dis-
play).
2. Immediately touch the necessary
heat setting. After 3 seconds
comes on in the display.
To stop the function change the heat
setting.
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
4.7 Power Boost
Power Boost makes more power availa-
ble to the induction cooking zones. Pow-
er Boost can be activated for a limited
period of time ( see Technical informa-
tion chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting.
To activate the function, touch
the ring comes on. As the zone gets
more hot, the color of the ring changes.
To deactivate, change the heat setting.
ENGLISH
9
.
.
. in