Setting Up The Monitor; Attaching The Monitor Base - HP w15e User Manual

3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Attaching the Monitor Base

1. Set the base on a flat surface such as a table top.
2. Using both hands, position the pedestal over the base and press down firmly to lock it in place. Be
sure the base is securely locked in place and adjust the tilt angle to the desired position.
CAUTION:
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
Figure 3-1
4 Chapter 3 Setting Up the Monitor
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
Attaching the Base to the Monitor