Conair Instant Heat CHV14IX Instruction & Styling Manual

04PC2450 CHV14IX IB 7/19/04 3:37 PM Page 1
IMPORTANT SAFETY use as described in the manual. Do not use
attachments not recommended by Conair.
INSTRUCTIONS 5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
When using electrical appliances, especial- properly, if it has been dropped or dam-
ly when children are present, basic safety aged, or dropped into water. Return the
precautions should always be followed, appliance to a service center for exami-
including the following: nation and repair.
6. Keep the cord away from heated surfaces.
READ ALL INSTRUCTIONS
7. Never block the air openings of the
BEFORE USING
appliance or place it on a soft surface, such
as a bed or couch, where the air openings
KEEP AWAY FROM WATER
may be blocked. Keep the air openings free
DANGER of lint, hair, and the like.
8. Never use while sleeping.
To reduce the risk of electrocution:
9. Never drop or insert any object into any
1. Always unplug this appliance immediately
opening or hose.
after using.
10. Do not use outdoors or operate where
2. Do not use while bathing.
aerosol ( spray ) products are being used
3. Do not place or store appliance where it
or where oxygen is being administered.
can fall or be pulled into a tub or sink.
11. Do not use an extension cord with this
4. Do not place in or drop into water or
appliance.
other liquid.
12. Do not touch "metal radiator strips"
5. Do not reach for an appliance that has
that hold rollers, as they will be hot.
fallen into water. Unplug immediately.
SAVE THESE
WARNING
To reduce the risk of burns, electrocution,
INSTRUCTIONS
fire, or injury to persons:
1. An appliance should never be left
unattended when plugged in.
2. Do not pull, twist or wrap line cord
around appliance.
3. This appliance should not be used by,
on, or near children or individuals with
certain disabilities.
4. Use this appliance only for its intended
OPERATING

USER MAINTENANCE

Your hairsetter is designed for household
INSTRUCTIONS
use and is virtually maintenance-free. This
product represents the highest standards of
How to Operate your Hairsetter:
workmanship and engineering research.
1. Place hairsetter on a firm, flat surface.
If cleaning becomes necessary, disconnect
With the lid closed, plug cord into outlet.
the appliance from the power source. Allow
This appliance has a polarized plug (one
the setter to cool. Clean the unit and the heat-
blade is wider than the other). As a safety
ing posts with a cloth. (Occasionally you may
feature, this plug will fit into a polarized out- want to clean your rollers. Use a damp cloth
let only one way. If the plug does not fit fully and mild detergent or soap.) If any abnormal
into the outlet, reverse the plug. If it still does condition occurs, unplug the hairsetter, allow
not fit, contact a qualified electrician. Do not it to cool, and return it to an authorized serv-
attempt to defeat this safety feature. ice representative for repair.
2. Once plugged in, turn the unit on by sliding
STORAGE
the switch to the on position. The red light will
Allow hairsetter to cool. Handle cord carefully
go on, the rollers will heat up quickly and the
for longer life; avoid jerking or straining at
ionic energy will be automatically activated
plug connections. Place hairsetter out of
(please refer to HOW TO CURL YOUR HAIR
reach of children in a safe, dry location.
for further instruction).
3. Allow rollers to heat with lid closed, as
this will provide the fastest, most efficient
heat-up. Once the rollers are hot, you can
begin setting your hair. Allow rollers to
heat longer for tighter curls. Never leave
your hairsetter on and unattended. Always
unplug the hairsetter when not in use.
Allow the hairsetter to cool down after use,
and store in a safe place.
4. Hair should be clean and dry or slightly
damp – never wet when setting.

HOW TO CURL YOUR HAIR

THE IONIZING FUNCTION GENERATES
NEGATIVE IONS THAT CAN:
1. Place ends of hair on
• neutralize positive charge on
roller and wind toward the
flyaway, frizzy hair
scalp. Roll up hair firmly,
• eliminate static electricity
and secure clip, crossing
• contribute to shine
over roller. Do not place clip
in roller slit.
The Ceramic Dual Ionic Port System with
2. The firmness of the curl
Ceramic Layered Technology Rollers
is regulated by the tempera-
ture and the length of time
the roller is left in your hair.
Soft
3. For tight, firm curls,
Flocking
leave rollers in the hair for at least ten min-
Layer
utes before removing. For soft, wavy curls,
the rollers should be removed from the hair
after a shorter period of time.
4. Removing roller:
hold roller in one hand
while removing clips
with the other. Gently
drop roller (DO NOT
PULL) and let curl
bounce back after
roller has been com-
pletely removed. Let cool for one minute for a
firmly set curl, and then style your hair into a
look that lasts for hours.
IMPORTANT: After using the hairsetter sever-
al times, you will find the best timing for the
texture of your hair and for the result you
desire.
Ceramic
Thermal
Layer
Aluminum
Heating
Core