Conair Instant HEAT CHV14IX - Jumbo-Sized Rollers Manual

HOW TO OPERATE YOUR HAIRSETTER

1. Place hairsetter on a firm, flat surface. With the lid closed, plug cord into outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
2. Once plugged in, turn the unit on by slidingthe switch to the on position. The red light will go on, the rollers will heat up quickly and the ionic energy will be automatically activated (please refer to HOW TO CURL YOUR HAIR for further instruction).
3. Allow rollers to heat with lid closed, asthis will provide the fastest, most efficient heat-up. Once the rollers are hot, you can begin setting your hair. Allow rollers to heat longer for tighter curls. Never leave your hairsetter on and unattended. Always unplug the hairsetter when not in use. Allow the hairsetter to cool down after use, and store in a safe place.
4. Hair should be clean and dry or slightlydamp – never wet when setting.

USER MAINTENANCE

Your hairsetter is designed for household use and is virtually maintenance-free. This product represents the highest standards of workmanship and engineering research. If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the heating posts with a cloth. (Occasionally you may want to clean your rollers. Use a damp cloth and mild detergent or soap.) If any abnormal condition occurs, unplug the hairsetter, allow it to cool, and return it to an authorized service representative for repair.

STORAGE

Allow hairsetter to cool. Handle cord carefully for longer life; avoid jerking or straining at plug connections. Place hairsetter out of reach of children in a safe, dry location.

HOW TO CURL YOUR HAIR

1. Place ends of hair onroller and wind toward the scalp. Roll up hair firmly, and secure clip, crossing over roller. Do not place clip in roller slit.
   
2. The firmness of the curlis regulated by the temperature and the length of time the roller is left in your hair.
3. For tight, firm curls, leave rollers in the hair for at least ten minutes before removing. For soft, wavy curls, the rollers should be removed from the hair after a shorter period of time.
4. Removing roller: hold roller in one hand while removing clips with the other. Gently drop roller (DO NOT PULL) and let curl bounce back after roller has been completely removed. Let cool for one minute for a firmly set curl, and then style your hair into a look that lasts for hours.
   

After using the hairsetter several times, you will find the best timing for the texture of your hair and for the result you desire.

THE IONIZING FUNCTION GENERATES NEGATIVE IONS THAT CAN:

• neutralize positive charge on flyaway, frizzy hair
• eliminate static electricity
• contribute to shine

The Ceramic Dual Ionic Port System with Ceramic Layered Technology Rollers

Rollers come packed three of the same size to a carton. Rollers are sold by the carton only.

Please add postage and handling to all orders. Postage and handling is as follows: Any order up to $5.00 add $.50 to order. Any order from $5.01 to $10.00 add $1.00 to order. Any order of $10.01 and over add $1.50 to order.

MAIL ORDER TO

Conair Corporation
150 Milford Road, East Windsor, NJ 08520

Conair Corporation
Service Department
7475 North Glen Harbor,
Glendale, AZ 85307

Include return name and address and model number of replacement rollers. Please make check payable to Conair Corporation.