Conair HS400 - 20 Assorted Hot Roller With Heated Clip Instruction & Styling Guide

OPERATING INSTRUCTIONS

How to operate your hairsetter with heated clips:

1. Place hairsetter on a firm, flat surface. With the lid closed, plug cord into outlet. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
2. Once plugged in, the red light will go on and the rollers will heat up quickly. Rollers are ready to use when the ready dot on one of the rollers turns transparent/white.
3. Be sure rollers and clips heat with lid closed, as this will provide the fastest, most efficient heat up.
4. Hair should be clean and dry or slightly damp — never wet — when setting.
5. To avoid contact with heat, we suggest using the clips from the top row first, followed by the clips on the bottom row.
6. Never leave your hairsetter on and unattended. Always unplug the hairsetter when not in use. Allow the hairsetter to cool down after use and store it in a safe place.

Please refer to HOW TO CURL YOUR HAIR for further instructions.

WAVES & VOLUME SETTER

Features

• 20 multi-size flocked hot rollers: 8 extra-large rollers (1¼ inch), 6 large rollers (1 inch), and 6 medium rollers (¾ inch)
• 20 heated clips
• Cover that keeps heat at the optimal temperature

Replacement rollers can be ordered online at www.conair.com by using the QR Code below or by calling customer service at 1-800-3-CONAIR

HOW TO CURL YOUR HAIR

1. Position ends of hair on roller and wind toward scalp. Roll hair up firmly. Remove clip from heated rail and secure over roller. Rail will heat up 12 clips at once. If more clips are needed, add them to heated rail as you use the initial 12.
   
2. The firmness of the curl is determined by the diameter of the roller and the length of time the roller is left in your hair.
3. For tight, firm curls, use smaller rollers and leave in the hair for at least 10 minutes before removing. For soft, wavy curls, use larger rollers and remove rollers after a shorter period of time.
4. Removing rollers: Hold roller in one hand while removing heated clip with the other. Gently release roller (DO NOT PULL) and let curl bounce back after roller has been completely removed. Repeat with other rollers. Let hair cool for one minute for firmly set curls. Then style your hair into a look that lasts for hours..

After using the hairsetter several times, you will find the best roller and best timing for the texture of your hair and the result you desire.

After using the hairsetter several times, you will find the best roller and best timing for the texture of your hair and the result you desire.

To use all roller sizes for full and bouncy curls Place extra-large rollers at the crown for lift. Place large rollers on the sides and back and place medium rollers at the nape of the neck. Or, randomly space large and medium rollers around the sides, back and nape for varying curl sizes.*

*The size of the curl will depend on the length of your hair, the size of the hair section, and the size of the roller. The smaller the section and roller, the tighter the curl, the bigger the section and roller, the looser the curl.

USER MAINTENANCE

Your hairsetter is designed for household use and is virtually maintenance free. This product represents the highest standards of workmanship and engineering research.

If cleaning becomes necessary, disconnect the appliance from the power source. Allow the setter to cool. Clean the unit and the heating rails with a cloth. Occasionally, you may want to clean your rollers. Use a damp cloth and mild detergent or soap to clean them. If any abnormal condition occurs, unplug the hairsetter, allow it to cool, and return it to an authorized service representative for repair.

STORAGE

Allow hairsetter to cool. Handle cord carefully to prolong its life; avoid jerking or straining at plug connections. Store hairsetter out of reach of children in a safe, dry location.

IF YOU THINK THE
POWER IS OFF WHEN THE SWITCH IS OFF, YOU'RE WRONG.
KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.