Electrical Operation - Dometic TYPE C40 RM 7655 L Manual

A. Manual Energy Selection

Electrical operation

5.2.2
1. 12V - operation (DC)
A
1. Set energy selector switch
2. Mains power
This option should only be selected where the supply voltage of the connection for
power supply corresponds to the value specified on the data plate. Any difference in
values may result in damage the appliance.
A
1. Set energy selector switch
The refrigerator should only be used while the motor is running, otherwise
the on-board-battery would be discharged within a few hours!
(A) to 12V .
Operating display “C”, 12V
lights “green”.
Appliance is in function.
If the operating display fails to light up ( it lights up “red” at AES models )
the device is not in operation. (For troubleshooting see 5.13)
(A) to 230V .
Operating display “C”, 230V
lights “green”.
Appliance is in function.
If the operating display fails to light up ( it lights up “red” at AES models )
the device is not in operation. (For troubleshooting see 5.13)
C
2. Use rotary switch (B) to regulate the
temperature in the main refrige-
rator compartment.
C
2. Use rotary switch (B) to regulate the
temperature in the main refrige-
rator compartment.
7
B
B