Using The Worldwide Web - HP L2035 User Manual

Troubleshooting
Problem
Image appears
blurred, indistinct, or
too dark.
Image is not
centered.
"Check Video
Cable" is displayed
on screen.
"Input Signal Out of
Range" is displayed
on screen.

Using the Worldwide Web

Before contacting customer services, refer to the support Web site
http://www.hp.com/support
at:
A–2
Possible Cause
Brightness and contrast
are too low.
Position may need
adjustment.
Monitor video cable is
disconnected.
Video resolution and/or
refresh rate are set
higher than what your
monitor supports.
www.hp.com
Solution
Press the Menu button to
open the OSD Menu, and
adjust the brightness and
contrast scales as needed.
Press the Menu button to
access the OSD menu.
Select Adjust Position to
adjust the horizontal or
vertical position of the
image.
Connect the 15-pin monitor
video cable to the VGA
connector on the computer.
Be sure that the computer
power is off while
connecting the video cable.
Restart your computer and
enter Windows Safe Mode
by pressing the F6 Function
key when the computer starts
to boot up. Change your
settings to a supported
setting. Restart your
computer so that the new
settings take effect.
User's Guide