Table of Contents
Advertisement
Operating the Monitor
Identifying Special OSD Messages
Special OSD messages appear on the monitor screen when
identifying the following monitor conditions:
■
Input Signal Out of Range, Change Setting to 1600 x 1200 -
60Hz—indicates the monitor is unable to access or fully
support the provided input signal.
■
Going to Sleep—Indicates the monitor is entering the sleep
mode.
■
Check Video Cable—Indicates the video cable may not be
plugged into the computer or monitor, or that the computer
may not be turned on.
Adjusting Screen Quality
Allow the monitor to warm up for 20 minutes before performing
the following procedures.
The Auto Adjustment feature automatically fine-tunes the image
quality each time a new video mode is utilized. If additional
improvement is desired, select the Auto button on the front bezel.
For more precise adjustments, use the adjustment pattern
provided on the CD-ROM, and adjust the clock and phase
settings (accessed from the OSD menu) as described in the
following section.
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat
panel screen to function like a standard monitor. Two controls in
the on-screen display can be adjusted to improve image
performance: Clock and Clock Phase. Use these controls only
when the auto adjust function does not provide a satisfactory
image.
4–8
www.hp.com
User's Guide
Hide quick links:
Advertisement
Table of Contents
