Installing The .Inf And .Icm Files; Installing From The Cd; Downloading From The Worldwide Web; Using The Auto-Adjustment Function - HP L2045w User Manual

Installing the .INF and .ICM Files

After you determine that you need to update, you can install the .INF and .ICM files from the CD or
download them.

Installing from the CD

To install the .INF and .ICM files on the computer from the CD:
1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed.
2. View the Monitor Driver Software Readme file.
3. Select Install Monitor Driver Software.
4. Follow the on-screen instructions.
5. After the software has been installed, restart Windows.
6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.
NOTE
the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file
on the CD.

Downloading from the Worldwide Web

To download the latest version of .INF and .ICM files from the HP monitors support Web site:
1. Refer to
2. Follow the links for the monitor to the support page and download page.
3. Ensure the system meets the requirements.
4. Download the software by following the instructions.

Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the −/Auto button on
the monitor and the auto-adjustment pattern software utility on the CD provided.
Do not use this procedure if the monitor is using a DVI input. If the monitor is using a VGA (analog)
input, this procedure can correct the following image quality conditions:
●
Fuzzy or unclear focus
●
Ghosting, streaking or shadowing effects
●
Faint vertical bars
●
Thin, horizontal scrolling lines
●
An off-center picture
20 Chapter 4 Operating the Monitor
You may need to install the digitally signed monitor .INF and .ICM files manually from
http://www.hp.com/support and select the country region.
ENWW