Download  Print this page

Chapter 3: Configuring The Network Clients; Accessing The Wireless Adsl Router; Setting An Ip Address For Wired Or Wireless Clients - Asus DSL-N12U User Manual

11n 300mbps wireless adsl modem router.
Hide thumbs

Advertisement

Accessing the wireless ADSL router

Setting an IP address for wired or wireless clients

To access the ASUS Wireless ADSL Router, you must have the correct TCP/IP
settings on your wired or wireless clients. Ensure that the clients' IP addresses are
within the same subnet as the ASUS Wireless ADSL Router.
By default, the ASUS Wireless ADSL Router integrates the DHCP server function,
which automatically assigns IP addresses to the clients in your network.
But in some instances, you may want to manually assign static IP addresses on
some of the clients or computers in your network rather than automatically getting
IP addresses from your wireless router.
Follow the instructions below that correspond to the operating system installed on
your client or computer.
Note: In the Router mode, if you want to manually assign an IP address to your client, we
recommend that you use the following settings:
• IP address: 19.168.1.xxx (xxx can be any number between  and 54. Ensure that the IP
address is not used by another device)
• Subnet Mask: 55.55.55.0 (same as the ASUS Wireless ADSL Router)
• Gateway: 19.168.1.1 (IP address of the ASUS Wireless ADSL Router)
• DNS: 19.168.1.1 (ASUS Wireless ADSL Router) or assign a known DNS server in your
network
Chapter 3: Configuring the clients
Configuring the
network clients
3
19
DSL-N12U

Advertisement

Table of Contents

   Also See for Asus DSL-N12U

   Related Manuals for Asus DSL-N12U

Comments to this Manuals

Symbols: 0
Latest comments: