Running The Engine - McCulloch M48 Owner's Manual

ENGINE CONTROL ENGINE CONTROL
ENGINE CONTROL
This is mounted at the top left side of the handle (most models). It operates the choke, for This is mounted at the top left side of the handle (most models). It operates the choke, for
This is mounted at the top left side of the handle (most models). It operates the choke, for starting, and
starting, and allows you to set the governed speed of the engine while cutting or to stop the starting, and allows you to set the governed speed of the engine while cutting or to stop the
allows you to set the governed speed of the engine while cutting or to stop the engine.
engine. engine.
Fig. 4 Fig. 4
You will not need to change the control setting constantly while mowing because the You will not need to change the control setting constantly while mowing because the
You will not need to change the control setting constantly while mowing because the
governor holds the selected speed, even under varying cutting loads. The positions for governor holds the selected speed, even under varying cutting loads. The positions for
governor holds the selected speed, even under varying cutting loads. The positions for
CHOKE, FAST, SLOW and STOP are marked. CHOKE, FAST, SLOW and STOP are marked.
CHOKE, FAST, SLOW and STOP are marked.
Fig. 5 Fig. 5

RUNNING THE ENGINE

RUNNING THE ENGINE RUNNING THE ENGINE
10
10 10
AU
AU AU