Cisco DPC2425 DOCSIS User Manual page 31

Docsis 2.0 wireless residential gateway with embedded digital voice adapter
Hide thumbs Also See for DPC2425 DOCSIS:
Table of Contents

Advertisement

Basic Settings
The following table provides a description of the pages available from within the
Basic Settings section of the Setup page.
Field Name
Password Settings
Set Time
Network Configuration
LAN IP Address
Management
Fixed CPE IP Assignment
Restart Modem
Save Configuration to
your PC
Advanced Settings
The following table provides a description of the pages available from within the
Advanced Settings section of the Setup page.
Field Name
Options
IP Address Filtering
MAC Address Filtering
Port Filtering
Port Forwarding
4028315 Rev A
How Do I Configure My DOCSIS Residential Gateway?
Description
Use this link to set or modify your password settings
Use this link to enable or disable time synchronization
by Network Time protocol
Use this link to enter or modify the basic settings for
your network
Use this link to configure how Internet protocol (IP)
addresses are assigned and managed in your network
Use this link to reserve IP addresses in the DHCP pool
that will be used as static IP addresses in your local
network.
Use this link to restart your residential gateway
Use this link to save your cable modem RG
configuration to your local PC and to restore the RG
configuration to your residential gateway, if necessary
Description
Use this link to enable or disable advanced features on
your network
Use this link to configure IP address filters. These
filters prevent designated IP addresses from accessing
the Internet
Use this link to configure MAC address filters. These
filters prevent designated MAC addresses from
accessing the Internet
Use this link to configure transmission control protocol
(TCP) and user datagram protocol (UDP) port filters.
These filters prevent a range of TCP/UDP ports from
accessing the Internet
Use this link to configure port forwarding for local IP
addresses. Port forwarding allows you to run a server
on the local area network (LAN) by specifying the
mapping of TCP/UDP ports to local PCs or to the IP
address of other devices. This is a static setting that
holds the ports open at all times
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epc2425

Table of Contents