Emergency operation
Displayer indicator light control of indoor unit
Special selection button: for those users who do not want light at night.
Light on: press "light" button when the light is off, the indoor indicator light will
●
be on.
Light off: press "light" button when the light is on, the indoor indicator light will
●
be off.
Notice: when there's no display of indoor indicator, please check the setting status
for light function of wireless remote controller.
If the wireless remote control is lost
or broken, please use the manual switch
button. At this time, the unit will run at the
Auto mode, but the temperature and fan
speed cannot be changed. The operation
was shown as below:
To open the panel, the manual switch
is on the displayer box.
Turn on the unit: At unit turned off, press
●
the button, the unit will run at Auto mode
immediately. The microcomputer will accord
to the indoor temperature to select (Cooling,
Heating, Fan) and obtain the comfortable effect.
Turn off the unit: At unit turned on, press the
●
button, the unit will stop working.
Emergency operation
-11-
Manual switch
Fig.3