Advertisement
Quick Links
HD View – NEC-Integrated Receivers
Get perfect HD image
and sound quality
every time.
Insert these neat,
made-for-NEC receivers
directly into your display.
Specifications
DDC: Complies with VESA DDC-2 specification
Distance (Maximum): AC3003A-NEC: 360 ft. (109.7 m);
AC3004A-NEC: 1000 ft. (304.8m)
Input/Output Video Signals: Analog Signal RGB;
0.7v p-p; 75 ohm
Resolution (Maximum): 1920 x 1440 at 60 Hz
(depending on the cable length)
Serial Baud Rate: 57 kbps
CE Approval: Yes
RoHS: Yes
Skew Compensation (Maximum): 63 nsec
Connector Type/Gender: RJ-45 / F; VGA HD15 F;
AC3004A-NEC only: Control: RJ-11
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
Overview
Part of our HD View™ modular multimedia transmission
system, these receivers may be inserted directly into your NEC
display to extend HD video and stereo audio transmission up
to 1000 feet (304.8 m).
These units are compatible with HD View Transmitters
(AC3000A, AC3008A, AC3016A), Line Splitters (AC3001A,
AC3002A), Receiver (AC3005A), and Tuner (AC3006A).
February 2010
AC3003A-NEC
MT1000A-85-R4
AC3004A-NEC
®
Advertisement
Related Manuals for Black Box AC3003A-NEC
Summary of Contents for Black Box AC3003A-NEC
- Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com...
- Page 2 Power Indicator Green – Power Indicator Yellow solid – Unit is connected to the system AC3003A-NEC and AC3004A-NEC Rear Panel – RJ-45 System Port Green/Yellow Yellow blinking – Bi-directional RS-232 communication (only possible when using one receiver at a time) 2.
-
Page 3: Troubleshooting
The display has possibly been set up for a different size. Press the “Size“ button on the remote control until “standard“ is displayed in green in the top right-hand side of the screen. c. Has the unit been tuned properly? [See “Operating and Maintaining Instructions / Tuning] Page 3 AC3003A-NEC... - Page 4 © Copyright 2010. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond ® ™ and HD View™ are trademarks of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.