Rear Panel; Hardware Installation - EverFocus ES2426-31 User Manual

PoE

2.4 Rear Panel

The 3-pronged power plug is placed at the rear panel of the switch right side shown as below.

2.5 Hardware Installation

Set the switch on a large flat space with a power socket close by. The flat space should be clean,
smooth, level and sturdy. Make sure there is enough clearance around the switch to allow
attachment of cables, power cord and allow air circulation. The last, use twisted pair cable to
connect this switch to your PC then user could start to operate the switch.
Flashing Data activating
Port is linked to Power
On
No Power Device is
Off
Device
connected
5
ES2426-31
26 (1~26)
24 (1~24)
24 (1~24)