Table of Contents
Advertisement
4.5 Firmware Update
Before the firmware update procedure is executed, you should enter the password twice and then
press Update button. The smart switch will erase the flash memory. There is a self-protection
mechanism in the Boot Loader, so the Boot Loader will keep intact. Even though the power is
turned off or the cable link fails during the firmware update procedure, the Boot loader will
restore the code to firmware update page.
After pressing Update button, the old web code will be erased. Then you can select the image file
and press "update" button to update the firmware you need.
4.6 Reboot Device
Click Confirm button to reboot the device.
※Note: The reboot is for software base instead of hardware base.
Figure 2-5
Figure 2-6
Figure 2-7
11
ES2426-31
Advertisement
Table of Contents
