Led Indicators; Rear Panel - EverFocus ES2446-51 User Manual

Front Panel
Note 1: The SFP ports are shared with normal RJ-45 ports 1,2,3 and 4. For example:
The RJ-45 Port 1 can not be used when SFP Port 1 link up.
Note 2: Click the Reset button for 5 seconds, the system configuration will be reset
to default.

2.3 LED Indicators

The LED Indicators present real-time information of systematic operation status. This
table provides description of LED status and the meaning.
LED
Power
Link/ ACT
PoE

2.4 Rear Panel

The 3-pronged power plug is placed at the rear panel of the switch right side
shown as below. This is reserved for AC Power Input.
Table 1-1 LED Indicators
Status Description
On
Off
On
Flashing
Off
On
Off
4
Power on
Disconnect to Power Source
Link
Data activating
No device is attached
Port is linked to Power Device
No Power Device is connected
ES2446-51