Whirlpool Easy-Yo-Use Automatic Washer Use & Care Manual page 10

OPERATING YOUR WASHER
U
NDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control Knob is set to a number
and pulled out, the washer fills (to the selected load
size) before agitation and timing start. The washer
begins agitating immediately after filling; agitation
occurs with the washer lid up or down.
During agitation, the XTRA ROLL ACTION™ agitator
Sequence of cycles
Wash selected time
* The Permanent Press cycle partially drains, fills, agitates
briefly, and drains.
10
creates a continuous
rollover action that pro-
vides a thorough cleaning
of the wash load.
WASH
Fill
Drain*
No agitation
Spin
After agitation starts, the Cycle Control Knob turns
clockwise until it points to an Off area and the
cycle ends.
NOTE: The washer pauses briefly throughout
each cycle. These pauses are normal for washer
operation.
RINSE
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
Fill
Off