Operation Procedure - Smeg SA384X Operating Instructions & Cook Book

OPERATION PROCEDURE

This section includes useful information about oven operation.
1
Plug power supply cord into 240V AC 50Hz
power outlet.
2
After placing the food in a suitable container,
open the oven door and put it on the metal
tray. The metal tray and roller guide must
always be in place during cooking.
3
Close the door. Make sure that it is firmly
closed.
4
The oven door can be opened at any time
during operation by pushing the door open
button. The oven will automatically shut off.
To restart the oven, close the door and then
touch the START button.
5
The oven automatically cooks on full power
unless set to a lower power level.
6
The display will show "0" when the oven is
plugged in.
WATTAGE OUTPUT CHART
The power-level is set by touch the Power button. The chart shows the display, the power level
•
and the percentage of power.
Touch the Power button
once
twice
3 times
4 times
5 times
7
The display returns to "0" or present time.
when the cooking time ends.
8
When the STOP/CLEAR button is touched
during the oven operation, the oven stops
cooking and all information retained. To erase
all information(except the present time), touch
the STOP/CLEAR button once more.
If the oven door is opened during the oven
operation, all information is retained.
9
If the START button is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.
Make sure the oven is properly installed
and plugged into the electrical outlet.
Power level (Indicator)
High
Mid-Hi
Mid
Mid-Low
Low
8
Approximate Percentage of Power
100%
80%
60%
40%
20%