Table of Contents
Advertisement
c.
Specify a new password in the Password field.
d. Specify the new password again in the Confirm Password field.
e.
Click Apply at the bottom of the page.
The access point displays a Settings Saved message.
f.
Click OK.
The Administration page appears.
8.
Set management VLAN:
a.
Click Filter Control from the menu on the left of the page.
The Filter Control page appears.
b. Click the Management VLAN ID: field, and enter the VLAN ID from which you will
manage the AP.
c.
Click the Management VLAN: Enable radio button.
RoamAbout Access Point 3000 Hardware Installation Guide 3-9
Using Web Management
Advertisement
Table of Contents
