HP PROLIANT ML330 Quickspecs page 22

QuickSpecs
Core Options
HP Power Supplies
HP Cooling Options
NOTE: It is highly recommended that you use the HP Power Advisor in defining
the "Right-Size" power supply for your need. The HP Power Advisor is located
at: www.hp.com/go/proliant-energy-efficient
CAUTION: Optional Power Supplies used for Redundancy "must" match the
original supplied power supply. Upgrades for more power headroom, when
replacing the original power supplies must match if purchased for redundancy.
Option Kits contain optional power supply, an IEC power cable and PDU IEC
cables. In ProLiant Servers that have more than one power slot (bay), only same
size power supplies are recommended. If non-matched power supplies are
inserted you will get errors and operation will fail.
HP 750W CS HE Power Supply
NOTE: The HP 750W power supply requires purchasing the Redundant Power
Supply Enablement Kit (P/N 508544-B21).
HP Redundant Power Supply Enablement Kit
NOTE: The Redundant Power Supply Enablement kit does not integrate any
power supply. To enable full Redundancy, it requires 2 units of 750W Power
supply.
HP 5U G6 Redundant fan kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU
IEC cables.
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
HP ProLiant ML330 Generation 6
or www.hp.com/go/hppoweradvisor
512327-B21
508544-B21
513927-B21
Page 22