HP PROLIANT ML330 Quickspecs page 16

QuickSpecs
Configuration Information - Factory Integrated Models
HP Power supplies
HP 450GB 6G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
HP 450GB 3G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
HP 300GB 6G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
HP 300GB 3G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
HP 146GB 3G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
HP 600GB 6G SAS 15K LFF (3.5-inch) Non-hot Plug Dual Port ENT 3y Wty
Hard Drive
NOTE: SAS non-hot plug drives require the Non-Hot Plug Internal SAS/SATA 4
port Cable kit (P/N 487734-B21) and a HP SAS/Smart Array Controller.
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard
Drive
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard
Drive
It is highly recommended that you use the HP Power Advisor in defining the
"Right-Size" power supply for your need. The HP Power Advisor is located at:
www.hp.com/go/proliant-energy-efficient
HP 460W Power Supply, FIO Kit
HP 750W CS HE Power Supply
NOTE: The HP 750W power supply requires purchasing the Redundant Power
Supply Enablement Kit (P/N 508544-B21).
HP Redundant Power Supply Enablement Kit
NOTE: The Redundant Power Supply Enablement kit does not integrate any
power supply. To enable full Redundancy, it requires 2 units of 750W Power
supply.
DA - 13361 Worldwide QuickSpecs — Version 17 — 3-31-2010
HP ProLiant ML330 Generation 6
or www.hp.com/go/hppoweradvisor
516826-B21
454234-B21
516824-B21
417950-B21
417855-B21
516830-B21
458947-B21
462595-B21
458941-B21
458939-B21
500447-B21
512327-B21
508544-B21
Page 16