Pnp/Pci Configuration - Intel AI5VG User Manual

Pentium vp3 baby at motherboard
Table of Contents

Advertisement

6.7 PNP/PCI Configuration

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
PNP OS Installed
: No
Resources Controlled by
: Manual
Reset Configuration Data
: Disabled
IRQ-3
assigned to
: Legacy ISA
IRQ-4
assigned to
: Legacy ISA
IRQ-5
assigned to
: PCI/ISA PnP
IRQ-7
assigned to
: Legacy ISA
IRQ-9
assigned to
: PCI/ISA PnP
IRQ-10 assigned to
: PCI/ISA PnP
IRQ-11 assigned to
: PCI/ISA PnP
IRQ-12 assigned to
: PCI/ISA PnP
IRQ-14 assigned to
: PCI/ISA PnP
IRQ-15 assigned to
: PCI/ISA PnP
DMA-0 assigned to
: PCI/ISA PnP
DMA-1 assigned to
: PCI/ISA PnP
DMA-3 assigned to
: PCI/ISA PnP
DMA-5 assigned to
: PCI/ISA PnP
DMA-6 assigned to
: PCI/ISA PnP
DMA-7 assigned to
: PCI/ISA PnP
PNP OS Installed
This field allows you to specify if the operating system installed in your
system is plug and play aware.
Note: Operating systems such as DOS, OS/2, and Windows 3.x do not
use PnP.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically. However, this capability needs you to use a PnP operating
system such as Windows 95. The default value is Manual.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is Disabled.
IRQ3/4/5/7/9/10/11/12/14/15, DMA0/1/3/5/6/7 assigned to
These fields allow you to determine the IRQ/DMA assigned to the ISA
bus and is not available to any PCI slot.
AI5VG Pentium VP3 Baby AT Motherboard User's Manual
Chapter 7 LANDesk User Guide
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE INC.
CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI Master Read Prefetch
PCI#2 Access #1 Retry
PCI Master 1 WS Write
PCI Master 1 WS Read
PCI IRQ Activated By
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Enabled
: Enabled
: Enabled
: Enabled
Enisabled
: Disabled
: Enabled
: Disabled
: Level
: PCI-Auto
: A
: B
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
45

Advertisement

Table of Contents
loading

Table of Contents