Electrolux EWF12832 User Manual page 20

20 www.electrolux.com
Any fabric softener or starching
additives must be poured into the
compartment marked '
starting the wash program.
Follow the product manufacturer's
recommendations on quantities to
use and do not exceed the MAX
mark in the detergent dispenser
drawer.
Do not spray stain pre-treatment
products (e.g. Preen) on or near
the machine, as it can attack
plastic materials reducing its
life.
6.7 Quantity Of Detergent To Be
Used
The type and quantity of detergent
will depend on the type of fabric,
load size, degree of soiling and
hardness of the water used.
Water hardness is classified in
so-called "degrees" of hardness.
Information on hardness of the
water in your area can be obtained
from the relevant water supply
company, or from your local
authority.
Follow the product manufacturers'
instructions on quantities to use.
Not enough washing powder
causes:
the washload to turn grey,
greasy clothes.
Too much washing powder causes:
sudsing,
reduced washing effect,
inadequate rinsing.
Use less detergent if:
' before
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form
during washing.