Table of Contents
Advertisement
Insignia 28" LED TV
Problem
Solution
Trouble
• See instructions and a table of
programming
common codes in
your existing
universal remote
universal
page 82.
remote
• Codes are subject to change. For
control.
up-to-date codes, go to
www.insigniaproducts.com/remotecodes
• Replace dead batteries with new
batteries. Refer to the User Guide
that accompanied your universal
remote control.
• Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
General
Problem
Solution
No power.
• Make sure that the AC adapter
• Unplug the AC adapter, wait 60
• Other devices (for example, a
"No signal"
• Press INPUT and make sure that
error message is
displayed.
• If you are using a cable or
• Make sure that you have the
After Auto
• Reception can vary by channel
Channel Search,
there are no
channels.
• Make sure that the antenna or
• Try replacing the cable between
76
"Program
controls" on
is correctly connected to your
TV and a power outlet.
seconds, then plug the adapter
back in and turn on your TV.
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
you have selected the correct
input for the device or service
you are trying to use.
satellite box, use the remote
that came with that box to
change channels.
correct input selected to view
channels from the cable or
satellite box.
depending on the broadcast
power level of a given station.
Contact your cable or satellite
TV provider.
cable/satellite TV is connected
securely to your TV.
the antenna/cable or
cable/satellite box and your TV.
www.insigniaproducts.com
Problem
Solution
When I press
• Turn on the device. Your TV
INPUT, I cannot
automatically detects and
select my
displays which video jacks have
device (it is
devices connected to them
grayed out).
when the devices are turned on.
• Turn off Auto Input Sensing. See
"Turn Input Sensor on or
page 70.
One or more
• Make sure that the channels are
channels do not
not blocked. See
display.
control
• Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See
page 59.
• If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
• Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
• If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
"Check the digital signal
strength" on page 60.
Password is lost.
• Enter 9999 to access parental
controls, then set a new
password. See
the
Some settings
• If a setting is grayed, the setting
cannot be
is not available in the current
accessed.
video input mode (for example
TV mode). Change to a different
video input source. See
the video input
page 40.
TV cabinet
• When the TV is in use, the
creaks.
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
Control buttons
• Make sure that the Button Lock
do not work.
option is set to Off. See
control
• Unplug the AC adapter, wait a
few seconds, then plug the
adapter back in and turn on
your TV.
TV keeps
• Make sure that the sleep timer
turning off.
is not turned on. See
sleep
off" on
"Set parental
levels" on page 63.
"Hide
channels" on
"Set or change
password" on page 61.
"Select
source" on
"Lock
buttons" on page 62.
"Set the
timer" on page 69.
Advertisement
Table of Contents
