Table of Contents
Advertisement
Insignia 28" LED TV
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Headphones/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system,
sound bar, or external speaker system. When a
device is connected to the
jack, the TV speakers are muted. You can
select:
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from headphones, a
home theater system, a sound bar, or an
external speaker system you connected to
the
/AUDIO OUT jack.
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the
/AUDIO OUT jack to control the
audio.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
or
to adjust the option, or press
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
56
You can also press MTS/SAP one
or more times to select the
audio mode.
/AUDIO OUT
www.insigniaproducts.com
Select the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
/AUDIO OUT jack on the side of your TV. The
following screen opens.
2 Press
you want to use, then press ENTER. You can
select:
• Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones, a home theater system, a sound
bar, or an external speaker system you
connected to the
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system, sound bar, or external speaker
system you connected to the
jack to control the audio.
or
or
to highlight the audio out mode
/AUDIO OUT jack.
/AUDIO OUT
Advertisement
Table of Contents
