Section 3 - Configuration
This page displays the current information for the GO-RT-AC750. It will display the
LAN, WAN (Internet), and Wireless information. If your Internet connection is set
up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect
to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect
button will be displayed. Use Disconnect to drop the PPPoE connection and use
Connect to establish the PPPoE connection.
General:
Displays the router's time and firmware version.
WAN:
Displays the MAC address and the public IP settings
LAN:
Displays the MAC address and the private (local) IP settings for the router.
Wireless LAN1:
Displays the 2.4GHz wireless MAC address and your wireless settings such as
SSID and Channel.
Wireless LAN2:
Displays the 5GHz wireless MAC address and your wireless settings such as SSID
and Channel.
LAN Computers:
Displays computers and devices that are connected to the router via Ethernet
and that are receiving an IP address assigned by the router (DHCP).
D-Link GO-RT-AC750 User Manual
Status
Device Info
81